Back to Release page

Release Notes for STM32F303K8-Nucleo Examples

Copyright 2016 STMicroelectronics

 

Update History

V1.11.0 / 12-September-2019

Main Changes

  • Update HAL I2C examples to be compliant with new I2C APIs
  • Update HAL TIM examples to be compliant with new TIM APIs
  • Update stm32f3xx_hal_conf.h files :
    • Change assert_failed() prototype to be compliant with MISRA C rule 11.4
    • Add reference to HAL EXTI driver
    • Add registers callbacks defines

V1.10.0 / 12-June-2018

Main Changes

  • Maintenance release.
  • Update stm32f3xx_hal_conf.h files to add support to HAL CAN Legacy Module.

V1.9.0 / 23-June-2017

Main Changes

  • Maintenance release.
  • Remove support of Atollic TrueSTUDIO STM32 (TrueSTUDIO) toolchain.
  • Align stm32f3xx_hal_conf.h with latest template defined in HAL.
  • Change assert_failed() prototype to be compliant with MISRA C rule 11.4
  • Fix calculation issue of uwDiffCapture for TIM_InputCapture example.

V1.8.0 / 14-April-2017

Main Changes

  • Maintenance release.
  • No changes compared to previous version (V1.7.0).

V1.7.0 / 16-December-2016

Main Changes

  • Maintenance release
  • Updated DMA_FLASHToRAM examples to implement new API HAL_DMA_RegisterCallback()
  • Updated all examples using timers to initialize the new field AutoReloadPreload in TIM_Base_InitTypeDef structure
  • Corrected I2C_TwoBoards_RestartComIT example by adding a wait on a Master request event before initiating a receive or transmit action
  • Updated error management (in case of AF error) in I2C_TwoBoards_ComPolling example
  • Updated UART examples after UART driver rework :
    • UART_HyperTerminal_DMA
    • UART_TwoBoards_ComDMA
    • UART_TwoBoards_ComIT
    • UART_TwoBoards_ComPolling
    • UART_WakeUpFromStop
  • Updated SPI examples (SPI_FullDuplex_ComDMA, SPI_FullDuplex_ComIT and  SPI_FullDuplex_ComPolling) following SPI driver rework

V1.6.0 / 01-July-2016

Main Changes

  • Maintenance release.
  • Updated WWDG examples following HAL WWDG driver evolution:
    • \WWDG\WWDG_Example
  • Updated I2C example to fix toolchain dependency issue:
    • \I2C\I2C_TwoBoards_RestartAdvComIT

V1.5.0 / 29-April-2016

Main Changes

  • Maintenance release.
  • Updated system_stm32f3xx.c files:
    • Added APBPrescTable definition.
  • Updated stm32f3xx_hal_conf.h files:
    • Set HSE_STARTUP_TIMEOUT value to 100ms instead of 5000ms.
  • Added new projects I2C to introduce I2C repeated start feature:
    • I2C_TwoBoards_RestartAdvComIT
    • I2C_TwoBoards_RestartComIT
  • Added new projects CRC:
    • CRC_Data_Reversing_16bit_CRC example to illustrate input/output data reversal features.
    • CRC_Bytes_Stream_7bit_CRC example to illustrate the usage Input/Output options CRC calculation.
  • Updated I2C projects after I2C driver rework:
    • I2C_TwoBoards_AdvComIT
    • I2C_TwoBoards_ComDMA
    • I2C_TwoBoards_ComIT
    • I2C_TwoBoards_ComPolling
    • I2C_WakeUpFromStop
  • Updated “Liberty” License with the new license “Ultimate Liberty”.

V1.4.0 / 13-November-2015

Main Changes

  • Maintenance Release.
  • Extended set of examples (ADC, CRC, DMA, FLASH, I2C, IWDG, PWR, RTC, SPI, TIM, UART, WWDG) is provided to
    start new development on STM32F303K8-Nucleo board.
  • Updated GPIO Output Speed literals naming to ensure HAL full compatibility.
  • Updated system_stm32f3xx.c files:
    • Used latest CMSIS template version.
    • Removed __IO or __I on constant table declaration.

V1.3.0 / 04-September-2015

Main Changes

  • First Official Release.
  • Basic examples (GPIO_IOToggle) are provided to easily start new development on STM32F303K8-Nucleo board.

License

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this component except in compliance with the License. You may obtain a copy of the License at:

https://opensource.org/licenses/BSD-3-Clause

For complete documentation on STM32 Microcontrollers visit www.st.com/STM32